Proware SB-3164E-G1S3

iSCSI - SAS/SATA iSCSI RAID 3U 16 bay

Overview

The Proware SB-3164E RAID subsystem features iSCSI host connectivity using 4x 1 Gigabit Ethernet ports to increase system efficiency and performance. It features 16 hot-swappable SAS/SATA II hard disk drive bays in a 19-inch 3U rackmount unit and supports the latest 2TB disk drives.

Features

  • Supports iSCSI jumbo frame
  • Local N-way mirror: Extension to RAID 1 level, N copies of the disk
  • Global and dedicated hot spare disks
  • Write-through or write-back cache policy for different application usage
  • Dedicated or shared cache allocation for volume usage
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports manual or scheduling volume snapshot (up to 32 snapshot)
  • On-line volume migration with no system down-time.
  • Online volume expansion
  • Instant RAID volume availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives

 
Proware
Proware SB-3164E

VMware Ready

Datasheet

Advanced Features

Proware SB-3164E-G1S3 Specifications


Model
 SB-3164E-G1S3
Form-factor
 3U 19-inch rackmount chassis
RAID processor
 Intel IOP342 64-bit
RAID level
 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
N-way mirror (N copies of the disk)
Cache memory
 512MB ~ 2GB DDR II
No. of channels (host+drive)
 2 + 16
Host bus interface
 1Gb/s Ethernet
Drive bus interface
 3Gb/s SAS / SATA II
Hot-swap drive trays
 Sixteen (16) 1-inch trays
Host access control
 Read-Write & Read-Only
Maximum logical volume
 up to 256
Maximum host connection
 up to 32
Maximum host clustering
 up to 16 for one logical volume
Manual/scheduling volume snapshot
 up to 32
Supports CHAP authentication
 Yes
802.3ad port trunking,
LACP support
 Yes
Jumbo frame support
 Yes
Snapshot rollback mechanism support
 Yes
Supports Microsoft Multipath I/O (MPIO)
 Yes
Supports Microsoft Windows Volume Shadow Copy Service(VSS)
 Yes
Global/dedicated cache configurable by volume
 Yes
Global and dedicated
hot spare disks
 Yes
Online Volume migration
 Yes
Online Volume sets expansion>
 Yes
Configurable RAID stripe size
 Yes
Instant RAID volume availability and background initialization support
Yes
Supports over 2TB per volume
 Yes
Online consistency check
 Yes
Bad block auto-remapping
 Yes
S.M.A.R.T. support
 Yes
New disk insertion / removal detection
 Yes
Auto volume rebuild
 Yes
Array roaming
 Yes
Audible alarm
 Yes
Password protection
 Yes
UPS connection
 Yes
Hot-swap power supplies
 Two (2) 460W power supplies w/PFC
Cooling fans
4
Battery backup
 Option
Power requirements
 AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
Environmental
  
Relative Humidity
 10% ~ 85% Non-condensing
Operating Temp
 10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions
 133(H) x 482(W) x 600(D)mm
Weight
 24.7 kgs (without drives)